• +61 1300 BUY PCB (1300 269 722)
  • +61 3 9111 1887
We make a difference

Whether you need rigid or flexible, single, double or multi-layered PCBs we can help... At QualiEco Circuits we advise on the manufacure and assemble of all types printed circuits board (PCBs)

Capability

QualiEco Circuits Australia's technical capability in detail for your PCB manufacturing requirements in high volume – we're always one step ahead in technology and innovation.

Rigid PCBs High Volume – In detail

DescriptionStandard PCBs Prototype PCBs

PCB Details
  • Max. no. of layers1 to 12 LayersUp to 18 Layers
  • Max. board size (L x W) in mm610mm x 460mm610mm x 460mm
  • Max. board thickness (in mm.)3.2mm3.2mm
  • Min. finished board thickness (in mm.)0.4mm0.4mm
  • Min. Core Thickness0.13mm0.13mm
  • Min. Dielectric0.075mm0.075mm
Base Material
  • (A) Base MaterialFR4 (Std, High Tg & HF)FR4 (Std, High Tg & HF)
  • (B) Inner layer Copper cladding  
  • * Max. Cu Wt. For Planes (Oz.)70µm (2oz)70µm (2oz)
  • * Max. Cu Wt. For Signals (Oz.)70µm (2oz)70µm (2oz)
  • * Min. Cu Wt. (Oz.)18µm18µm
  • (C) Outer layer Copper cladding  
  • *Max Cu Wt. (Oz.)105µm (3oz)105µm (3oz)
  • *Min Cu Wt. (Oz.)12µm12µm
Etching
  • Minimum (in mils)  
  • For copper thickness of 0.5 OzTrace Width: 4mil
    Spacing: 4mil
    Trace Width: 4mil
    Spacing: 4mil
  • For copper thickness of 1.0 OzTrace Width: 5mil
    Spacing: 5mil
    Trace Width: 5mil
    Spacing: 5mil
  • For copper thickness of 2.0 OzTrace Width: 6mil
    Spacing: 7mil
    Trace Width: 6mil
    Spacing: 7mil
  • For copper thickness of 3.0 OzTrace Width: 9mil
    Spacing: 10mil
    Trace Width: 9mil
    Spacing: 10mil
Drilling
  • Min. finished via hole size  
  • Mechanical Drilling0.2mm0.2mm
  • Laser Drilling0.1mm0.1mm
  • Min. finished via pad size0.5mm0.5mm
  • Min. annular ring (via holes)5 mils5 mils
  • Min. annular ring (Component holes)8mil8 mils
  • Min. hole size tolerance (in mils)  
  • Hole size < 0.024"PTH: +/-0.076mm
    NPTH: +/-0.05mm
    PTH: +/-0.076mm
    NPTH: +/-0.05mm
  • Hole size > 0.024" < 0.138"PTH: +/-0.076mm
    NPTH: +/-0.05mm
    PTH: +/-0.076mm<
    NPTH: +/-0.05mm
  • Hole size > 0.138"PTH: +/-0.076mm
    NPTH: +/-0.05mm
    PTH: +/-0.076mm
    NPTH: +/-0.05mm
  • Blind & Buried vias manufacturableYESYES
  • Drill to track clearance for inner layers0.18mm (4L)
    0.20mm (6L)
    0.25mm (8L)
    0.30mm (10L)
    0.18mm (4L)
    0.20mm (6L)
    0.25mm (8L)
    0.30mm (10L)
  • Min. annular ring (Component holes)0.2mm to 0.4mm0.2mm to 0.4mm
Plating / Surface Treatment
  • HASLYESYES
  • Electrolytic GoldYESYES
  • Electroless Nickel / GoldYESYES
  • SMOBC with OSP (Entek Coating)YESYES
  • Immersion SilverYESYES
  • Immersion TinYESYES
Layer construction & Impedance Design
  • Min. core thickness0.13mm0.13mm
  • Preferred varieties of Thin core laminates generally stocked (in mils) 0.13/ 0.15/ 0.2/ 0.27/ 0.3/ 0.35/ 0.4/ 0.5/ 0.6/ 0.8/ 1.0/ 1.2mm

    5, 6, 8, 10, 12, 14, 16, 20, 24, 32, 40, 48 & 63mil
    0.13/ 0.15/ 0.2/ 0.27/ 0.3/ 0.35/ 0.4/ 0.5/ 0.6/ 0.8/ 1.0/ 1.2mm

    5, 6, 8, 10, 12, 14, 16, 20, 24, 32, 40, 48 & 63mil
  • Prepregs generally stocked (in mils)2, 3, 5 & 9mil2, 3, 5 & 9mil
Maximum Fabrication Tolerance
  • Maximum Fabrication Tolerance+/-10% of finished board thickness+/-10% of finished board thickness
Solder mask
  • Mask opening (pad + XXX)3mil3mil
  • Min. solder mask web width between pads4mil4mil
  • PAD to PAD min. space if web required4mil4mil
  • SM clearance to PAD5mil5mil
  • Min. SM thickness5µm5µm
Component Reference (Silk Screen)
  • Legend (Silk Screen) line width≥6mil≥6mil
  • Min. character height≥0.8mm≥0.8mm
  • Min. character spacing≥4mil≥4mil
Electrical Test
  • CAD net list testing (IPC356D)PossiblePossible
  • Min. SMD pitch testable0.4mm0.4mm
  • Min SMD pad width testable0.2mm0.2mm
  • Max testing area (mm x mm)600mm x 600mm600mm x 600mm
  • Testing voltage250V DC250V DC
  • Open resistance10MΩ10MΩ
  • Short resistance50MΩ50MΩ
  • Top and Bottom Test simultaneouslyYESYES
Controlled Impedance measurement
  • Controlled Impedance measurementYESYES
Inner Layers (VCC and GND Layers)
  • Minimum Isolation from finished Drill0.18mm (4L)
    0.20mm (6L)
    0.25mm (8L)
    0.30mm (10L)
    0.18mm (4L)
    0.20mm (6L)
    0.25mm (8L)
    0.30mm (10L)
  • Min. Annular ring for thermal pads0.25mm0.25mm
  • Min. Thermal Air Gap0.25mm0.25mm
  • Cu area to PCB edge clearance0.25mm0.25mm
Inner Layers (Signal Layers)
  • Minimum Annular Ring0.15mm0.15mm
  • Finished Drill to Track clearance0.18mm (4L)
    0.20mm (6L)
    0.25mm (8L)
    0.30mm (10L)
    0.18mm (4L)
    0.20mm (6L)
    0.25mm (8L)
    0.30mm (10L)
  • Cu area to PCB edge clearance0.25mm0.25mm
Scoring (V-cut)
  • Score line to Cu area clearance0.3mm0.3mm
Routing
  • Minimum router diameter0.8mm0.8mm
  • Cu area to PCB edge clearance (Outer Layer)0.2mm0.2mm
  • Cu area to PCB edge clearance (Inner Layer)0.3mm0.3mm
Slot
  • Minimum slot size0.5mm0.5mm

1. We prefer min. pad size >= hole size + 0.60 mm for any PTH hole.
2. NPTH holes should preferably not have any pad around them.
3. Jump scoring and depth routing possible – conditions apply

Product Comparison Chart

We have the capability to manufacture and assemble Single Sided/Layer (SS), Double Sided/Layer (DS-NPTH & DS-PTH) and MultiLayer (up to 32 layers) PCBs with RoHS as an option.

Compare Low Cost Prototype with Standard Prototype and Production. Choose one which best suits your requirements.

Compare now!
Our capabilities

Our capabilities

We can manufacture and assemble Single Sided/Layer (SS), Double Sided/Layer (DS-NPTH & DS-PTH) and MultiLayer (up to 32 layers) PCBs with RoHS as an option.

Need to know more about our capabilities?

Learn more

SMT stencils

SMT stencils

More efficient manufacturing of solder paste SMT stencils.

Learn more

PCB design

PCB design

We'll review your PCB designs and identify refinements for easier manufacturing.

Learn more

What our customers say?

For printed circuit boards (PCBs) or PCB assembly you can count on. Talk to the friendly and experienced team at QualiEco Circuits, Australia.