Whether you want single sided, double sided or multi-layter printed circuit board - we'll make your PCB manufacturing faser, easier and more cost-effective
Printed circuit boards (PCBs) & SMT Stencils
Multilayer PCBs have one or more conductor pattern inside the board, to increase the area available for the wiring. This is achieved by gluing (laminating) several double-sided circuit boards together with insulating layers in between.
The number of layers is referred to as the number of separate conductor patterns – usually even and including the two outer layers. Most boards have between 4 and 8 layers, but PCBs with almost 100 layers can be made.
Since the layers in a PCB are laminated together, it’s often difficult to tell how many there are, but if you inspect the side of the board closely you might be able to count them.
Large super computers often contain boards with plenty of layers, but since it’s becoming more efficient to replace these computers with clusters of ordinary PCs, high layer counts are now less common.
Vias in multilayer PCBs
The vias described in Double-sided PCBs always penetrate the whole board. When there are multiple layers of conductor patterns and you only want to connect some of them, vias waste space that could be used to route other wires. 'Buried ' and 'blind ' vias avoid this problem because they only penetrate as many layers as is necessary.
Blind vias connect one or more of the inner layers with one of the surface layers, without penetrating the whole board. Buried vias only connect inner layers so you can’t see them by looking at the surface of the PCB.
In multi-layer PCBs whole layers are almost always dedicated to Ground and Power. So we classify the layers as Signal, Power or Ground planes. Sometimes there is more than one of both Power and Ground planes, especially if the different components on the PCB require different supply voltages.
Product Comparison Chart
We have the capability to manufacture and assemble Single Sided/Layer (SS), Double Sided/Layer (DS-NPTH & DS-PTH) and MultiLayer (up to 32 layers) PCBs with RoHS as an option.
Compare Low Cost Prototype with Standard Prototype and Production. Choose one which best suits your requirements.Compare now!
We can manufacture and assemble Single Sided/Layer (SS), Double Sided/Layer (DS-NPTH & DS-PTH) and MultiLayer (up to 32 layers) PCBs with RoHS as an option.
Need to know more about our capabilities?
What our customers say?
QualiEco Circuits Limited is an excellent supplier to us! We appreciate the quality of service and support that we receive from QualiEco Circuits. They always deliver what is promised
For printed circuit boards (PCBs) or PCB assembly you can count on. Talk to the friendly and experienced team at QualiEco Circuits, Australia.